Twelve Key Wireless Network Security Policies
Wireless networks have their own special security requirements. Follow these recommendations for a more secure enterprise WLAN.
With a wireless network, you must consider security policies that will protect resources from unauthorized people. Let's take a look at what you should include in a wireless network security policy for an enterprise. Consider the following recommendations:
Activate 802.11 Encryption to Make Data Unintelligible to Unauthorized Users
WEP has weaknesses, making it inadequate for protecting networks containing information extremely valuable to others. There are some good hackers out there who can crack into a WEP-protected network using freely-available tools. The problem is that 802.11 doesn't support the dynamic exchange of WEP keys, leaving the same key in use for weeks, months, and years. For encryption on enterprise networks, aim higher and choose WPA, which is now part of the 802.11i standard. Just keep in mind that WPA (and WEP) only encrypts data traversing the wireless link between the client device and the access point. That may be good enough if your wired network is physically secured from hackers. If not, such as when users are accessing important information from Wi-Fi hotspots, you'll need more protection.
Utilize IPSec-based Virtual Private Network (Vpn) Technology for End-to-end Security
If users need access to sensitive applications from Wi-Fi hotspots, definitely utilize a VPN system to provide sufficient end-to-end encryption and access control. Some companies require VPNs for all wireless client devices, even when they're connecting from inside the secured walls of the enterprise. A "full-throttle" VPN solution such as this offers good security, but it becomes costly and difficult to manage when there are hundreds of wireless users (mainly due to the need for VPN servers). As a result, consider implementing 802.11 encryption when users are operating inside the enterprise and VPNs for the likely fewer users who need access from hotspots.
Utilize 802.1X-based Authentication to Control Access to Your Network
Establish the Wireless Network on a Separate VLAN
A firewall can then help keep hackers located on the VLAN associated with the wireless network from having easy access to corporate servers located on different, more secured VLANs (i.e., not accessible from the wireless network). In this manner, the wireless network is similar to a public network, except you can apply encryption and authentication mechanisms to the wireless users.
Ensure Firmware Is Up-to-date in Client Cards and Access Points
Vendors often implement patches to firmware that fix security issues. On an ongoing basis, make it a habit to check that all wireless devices have the most recent firmware releases.
Ensure Only Authorized People Can Reset the Access Points
Some access points will revert back to factory default settings (i.e., no security at all) when someone pushes the reset button on the access point. We've done this when performing penetration testing during security assessments to prove that this makes the access point a fragile entry point for a hacker to extend their reach into the network. As a result, provide adequate physical security for the access point hardware. For example, don't place an access point within easy reach. Instead, mount the access points out of view above ceiling tiles. Some access points don't have reset buttons and allow you to reset the access point via an RS-232 cable through a console connection. To minimize risks of someone resetting the access point in this manner, be sure to disable the console port when initially configuring the access point.
Disable Access Points During Non-usage Periods
If possible, shut down the access points when users don't need them. This limits the window of opportunity for a hacker to use an access point to their advantage as a weak interface to the rest of the network. To accomplish this, you can simply pull the power plug on each access point; however, you can also deploy power-over-Ethernet (PoE) equipment that provides this feature in a more practical manner via centralized operational support tools.
Assign "Strong" Passwords to Access Points
Don't use default passwords for access points because they are also well known, making it easy for someone to change configuration parameters on the access point to their advantage. Be sure to alter these passwords periodically. Ensure passwords are encrypted before being sent over the network.
Don't Broadcast SSIDs
If this feature is available, you can avoid having user devices automatically sniff the SSID in use by the access point. Most current computer operating systems and monitoring tools will automatically sniff the 802.11 beacon frames to obtain the SSID. With SSID broadcasting turned off, the access point will not include the SSID in the beacon frame, making most SSID sniffing tools useless. This isn't a foolproof method of hiding the SSID, however, because someone can still monitor 802.11 association frames (which always carry the SSID, even if SSID broadcasting is turned off) with a packet tracer. At least shutting off the broadcast mechanism will limit access.
Reduce Propagation of Radio Waves Outside the Facility
Through the use of directional antennas, you can direct the propagation of radio waves inside the facility and reduce the "spillage" outside the perimeter. This not only optimizes coverage, it also minimizes the ability for a hacker located outside the controlled portion of the company to eavesdrop on user signal transmissions and interface with the corporate network through an access point. This also reduces the ability for someone to jam the wireless LAN - a form of denial-of-service attack - from outside the perimeter of the facility. In addition, consider setting access points near the edge of the building to lower transmit power to reduce range outside the facility. This testing should be part of the wireless site survey.
Implement Personal Firewalls
If a hacker is able to associate with an access point, which is extremely probable if there is no encryption or authentication configured, the hacker can easily access (via the Windows operating system) files on other users' devices that are associated with an access point on the same wireless network. As a result, it's crucial that all users disable file sharing for all folders and utilize personal firewalls. These firewalls are part of various operating systems, such as Windows XP and Vista, and 3rd party applications as well.
Control the Deployment of Wireless LANs
Ensure that all employees and organizations within the company coordinate the installation of wireless LANs with the appropriate information systems group. Forbid the use of unauthorized access points. Mandate the use of approved vendor products that you've had a chance to verify appropriate security safeguards. Maintain a list of authorized radio NIC and access point MAC addresses that you can use as the basis for identifying rogue access points.
With these recommendations in mind, you have a basis for forming a solid security policy. When deciding on which techniques to implement, however, be sure to consider actual security needs.