Motorola Promises Mesh Spec Support

The company says it will build draft support of the fledgling 802.11s standard into products now, but some question if it's worth it.

By Eric Griffith | Posted Apr 19, 2006
Print ArticleEmail Article
  • Share on Facebook
  • Share on Twitter
  • Share on LinkedIn

There's a lot of things standards are supposed to do, but foremost is to create interoperability between vendors. No where is it more apparent that there's a lack of a standard than in mesh networking using Wi-Fi, where every company has a different way of doing things, whether its self-configuration of nodes or traffic signal hopping and routing.

That could all change with the coming of 802.11s. The IEEE's 802.11 Task Group S was formed to bring some order to mesh networks, and as of the March 2006 meeting, the competing groups with mesh proposals (SEE Mesh and Wi-Mesh Alliance) have merged to create a single proposal that was unanimous confirmed as the start point for a specification.

Just a month later, and one company, Motorola, is already saying its products will support what's found in the draft of 802.11s immediately. Which might not mean much.

"What you've got today is a draft of a standard that does a reasonably good job to get everyone on the same page of what they mean by a mesh," says Peter Stanforth, Motorola's director of technology in the Mesh Networks product group. "It has the industry agreeing in principle... it is a huge step that helps everybody, gives them [the ability to have] apple-to-apples discussions.

According to Stanforth, as it stands today 11s covers the infrastructure-based elements of making a mesh networking using Wi-Fi, the way information is passed around the mesh topology, but not necessarily how it gets to client systems (or even including clients in the mesh).  

But will 802.11s even matter when it comes to the big, municipal-sized networks that mesh Wi-Fi is quickly becoming synonymous with?

Phil Belanger doesn't think so. He helped form the Wi-Fi Alliance in its infancy and later went on to do marketing/PR for companies like the late Vivato and most recently mesh equipment provider BelAir Networks. Belanger issued a statement posted on Wi-Fi Net News last month regarding 11s progress which said, "this standard will have little impact on that market [city-wide Wi-Fi]. The biggest impact of 802.11s will be in your home."

He contends that 11s "was developed as a single-radio, shared mesh extension of indoor access points." Most outdoor mesh Wi-Fi equipment has multiple radios that can include Wi-Fi, WiMax and 4.9 GHz for public safety use. Such vendors include Motorola, BelAir, Strix Systems, and SkyPilot. (Tropos Networks, which claims the largest deployment base of mesh Wi-Fi hardware, remains single-radio, keeping costs down.)

Belanger feels that the multi-radio mesh guys are part of the 11s standard process because to not be there would be marketing suicide. They'd prefer 802.11s goes away, especially companies with special routing technology that is their big differentiator from the competition.

BelAir's CTO, Stephen Rayment, is permanent secretary of the 802.11s Task Group in the IEEE and he says things have changed: "The standard is not limited to either indoor or outdoor mesh, or to the number of radios used in the access points...There are two important applications for P802.11s:  the first is municipal and city-wide networks, and the second is for home networks."

Motorola's Stanforth concurs, saying that while the original 11s was indeed limited to 32 indoor nodes at a time, "almost no one had an interest in that limitation. From the beginning, people wanted it to be broader than that and have it extend into wide area deployments."

Motorola's plan is to build 11s support into the MeshConnex software that powers the company's MotoMesh hardware. He says the software is compatible with the 11s draft as written today, but admits it's "meaningless since [the specification] will change" as it goes toward a ratification, which is unlikely until 2007 or 2008.

We just want customers to know that we're committing to refining and tweaking our software we've have developed the ability to do so with over-the-air upgrades," says Stanforth. "We'll enhance the products as the specification changes."

Strix Systems, for one, told Wi-Fi Planet today that, "general speaking, Strix is committed to standards," but didn't comment on whether it would support 11s at all other than to " see how this one will eventually unfold and what substance it will carry." BelAir says it will fully support 802.11s, but not until it is finalized.

Even if 11s is a finished standard suitable for city-wide networks, it might never mean making heterogeneous networks using all sorts of vendors. Stanforth says "It's likely there will be a lowest common denominator on a basic level to allow interoperation between Tropos and Motorola and others." He expects different vendors to serve different types of niche markets.

Belanger agrees, saying, "do not expect to see interoperability between a Tropos and a Strix box... The main end user benefit in this market will be the creation of a mesh portal interface that will allow the big outdoor mesh to talk to your 802.11s enabled home AP/router in a standardized way. That will bring interoperability between different home routers and the big outdoor mesh infrastructure."

Motorola recently joined the Wi-Fi Alliance, but it's unknown at this time of the Alliance will be the group that checks mesh products for interoperability. If not, Stanforth says "there's already talk [in 11s meetings] of a group being created to define interoperability procedures."

Article courtesy of Wi-Fi Planet

Comment and Contribute
(Maximum characters: 1200). You have
characters left.
Get the Latest Scoop with Enterprise Networking Planet Newsletter