Networking 101: Understanding OSPF Routing

As the most widely used interior gateway protocol, OSPF is where most network designers look when RIP just isn't enough.

By Charlie Schluting | Posted Jun 1, 2006
Page of   |  Back to Page 1
Print ArticleEmail Article
  • Share on Facebook
  • Share on Twitter
  • Share on LinkedIn

Open Shortest Path First is a robust link-state interior gateway protocol (IGP). People use OSPF when they discover that RIP just isn’t going to work for their larger network, or when they need very fast convergence. This installment of Networking 101 will provide a conceptual overview of OSPF, and the second part of our OSPF coverage will delve a bit deeper into the protocol itself, as well as OSPF area configurations.

OSPF is the most widely used IGP. When we discuss IGPs, we’re talking about one routing domain, or Autonomous System (AS). Imagine a medium-sized company with multiple buildings and departments, all connected together and sharing two redundant Internet links. All of the buildings on-site are part of the same AS. But with OSPF we also have the concept of an Area, which allows further segmentation, perhaps by department in each building.

To understand the design needs for areas in OSPF, let’s start by discussing how OSPF works. There’s some terminology you may not have encountered before, including:

  • Router ID: In OSPF this is a unique 32-bit number assigned to each router. This is chosen as the highest IP address on a router, and can be set large by configuring an address on a loopback interface of the chosen router.
  • Neighbor Routers: two routers with a common link that can talk to each other.
  • Adjacency: a two-way relationship between two neighbor routers. Neighbors don’t always form adjacencies.
  • LSA: Link State Advertisements are flooded; they describe routes within a given link.
  • Hello Protocol: this is how routers on a network determine their neighbors and form LSAs.
  • Area: a hierarchy. A set of routers that exchange LSAs, with others in the same area. Areas limit LSAs and encourage aggregate routes.

OSPF is a link-state routing protocol, as we’ve said. Think of this as a distributed map of the network. To get this information distributed, OSPF does three things.

First, when a router running OSPF comes up it will send hello packets to discover its neighbors and elect a designated router. The hello packet includes link-state information, as well as a list of neighbors. Providing information about your neighbor to that neighbor serves as an ACK, and proves that communication is bi-directional. OSPF is smart about the layer 2 topology: if you’re on a point-to-point link, it knows that this is enough, and the link is considered “up.” If you’re on a broadcast link, the router must wait for an election before deciding if the link is operational.

The election ballot can be stuffed, with a Priority ID, so that you can ensure that your beefiest router is the DR. Otherwise, the largest IP address wins. The key idea with a DR and backup DR (BDR) is that they are the ones to generate LSAs, and they must do database exchanges with other routers in the subnet. So, non-designated routers form adjacencies with the DR. The whole DR/BDR design is used to keep the protocol scalable. The only way to ensure that all routers have the same information is to make them synchronize their databases. If you have 21 routers, and want to bring another one up, then you’d have to form 21 new adjacencies. If you centralize the database, with a backup (just in case), then adding more becomes an easy to manage linear problem.

The database exchange is part of bringing up adjacencies after the hello packets are exchanged, and it’s very important. If the databases are out of sync, we could risk routing loops, blackholes and other perils. The third part of bringing up an adjacency is Reliable Flooding, or LSA exchange.

The details of an LSA, as well as a more advanced discussion of areas will be the topic of the next Networking 101. For now, just know that area zero is special, and if you have multiple areas, they must all touch area zero. This is also called the Backbone Area. There are different types of areas in OSPF, and it can get really crazy when you throw in Virtual Links to allow two areas to speak without hitting area zero. Alas, there also are different types of routers in OSPF.

ABR
An Area Border Router is a router that is in area zero, and one or more other areas.

DR, BDR
A Designated Router, as we said, is the router that keeps the database for the subnet. It sends and receives updates (via multicast) from the other routers in the same network.

ASBR
The Autonomous System Boundary Router is very special, but confusing. The ASBR connects one or more AS, and exchanges routes between them. The ASBR’s purpose is to redistribute routes from another AS into its own AS.

The concept of redistribution finally rears its head: let’s say we have a router, an internal-only router (not a BR), and we wish to connect it to a new network that we don’t control. After this connection is made, we have a few options. We can fire up a non-IGP routing protocol, like BGP, to exchange routes. Alternatively, we could decide that a summary route is good enough, and hard-code a static route to the new network in this router. Anything directly using this router for this destination would be able to get to the new network, but OSPF doesn’t know about it. To make that happen, we ‘redistribute” the miscellaneous information into OSPF. We wouldn’t want to feed 200K+ routes from BGP into OSPF, but if we went the static route, we’d definitely want to propagate that information so everyone in our AS could get to the new place. As soon as we tell our internal router that it should redistribute static routes into OSPF, it becomes an ASBR, and the entire network can reach the new network.

Come back next week for the areas and LSA discussion, which will consolidate your understanding of the whole OSPF concept, and enable you to understand good OSPF design.

In a Nutshell

  • OSPF is a fast-converging, link-state IGP used by millions.
  • OSPF forms adjacencies with neighbors and shares information via the DR and BDR using Link State Advertisements.
  • Areas in OSPF are used to limit LSAs and summarize routes. Everyone connects to area zero, the backbone.

Comment and Contribute
(Maximum characters: 1200). You have
characters left.
Get the Latest Scoop with Enterprise Networking Planet Newsletter