Setting Up An IMAP-Based Email Solution, part 2

By Stew Benedict | Jun 15, 2001 | Print this Page
http://www.enterprisenetworkingplanet.com/netsp/article.php/785861/Setting-Up-An-IMAPBased-Email-Solution-part-2.htm

Apache SSL, PHP Setup:

You'll want openSSL to be able to encrypt the connections. This can be downloaded from www.openssl.org/source/:

 bash-2.03$ tar -xzf openssl-0.9.5a.tar.gz
 bash-2.03$ cd openssl-0.9.5a
 bash-2.03$ ./config
 bash-2.03$ make
 bash-2.03$ sudo make install

Get Apache from www.apache.org/dist:

 bash-2.03$ tar -xzf apache_1.3.19.tar.gz

You'll also need mod_ssl to add as an Apache plug-in from www.modssl.org/source/:

 bash-2.03$ tar -xzf mod_ssl-2.8.2-1.3.19.tar.gz
 bash-2.03$ cd /home/stew/mod_ssl-2.8.2-1.3.19
 bash-2.03$ ./configure --with-ssl=../openssl-0.9.5a --with-apache=../apache_1.3.19

Back to Apache:

 bash-2.03$ export SSL_BASE=../openssl-0.9.5a
 bash-2.03$ ./configure --enable-module=ssl --enable-shared=ssl
 bash-2.03$ make
 bash-2.03$ make certificate
 bash-2.03$ make install

You'll be asked a number of organizational questions during the "make certificate" step, as well as being prompted for a pass phrase to decrypt the key.

Three server certificate files will be created in the Apache directory:

 conf/ssl.key/server.key
 conf/ssl.crt/server.crt
 conf/ssl.csr/server.csr

The last of these can be submitted to an official certificate authority if you would like to get an official certificate.

You'll need PHP to implement SquirrelMail. PHP is a scripting language that can be built as a module for Apache. It is downloadable from www.php.net.

 bash-2.03$ tar -xzf php-4.0.4pl1.tar.gz
 bash-2.03$ cd php-4.0.4pl1
 bash-2.03$ ./configure --with-apxs=/usr/local/apache/bin/apxs 
 bash-2.03$ make
 bash-2.03$ sudo make install

If you want international language support add --with-gettext to the configure line.

Make sure the following lines are in /etc/httpd/conf/httpd.conf:
 LoadModule php4_module        modules/libphp4.so
 AddModule mod_php4.c

 AddType application/x-httpd-php .php3 .phtml .php
 AddType application/x-httpd-php-source .phps

They may be scattered about, but they should be there. I found that the PHP entries ended up wrapped inside of the <IfDefined SSL> stanza. To use PHP without SSL, you'll want them outside of that entry. Cut and paste to move beyond </IfDefined>:

 <IfDefine SSL>
 LoadModule ssl_module         libexec/libssl.so
 </IfDefine>
 LoadModule php4_module        libexec/libphp4.so

 <IfDefine SSL>
 AddModule mod_ssl.c
 </IfDefine>
 AddModule mod_php4.c

You will also need to change the port Apache uses. By default it is installed set to 8080, so the server does not need to be run as root initially. Normal http access is at port 80, and https access is at port 443. If you choose to use the higher numbered ports, you'll have to inform your users to connect to them instead.

 Port 80

You'll also probably want to add index.php to the DirectoryIndex entry:

 DirectoryIndex index.html index.php

Start Apache:

 /usr/local/apache/bin/apachectl start

You should see something like this in /var/log/http/error.log:

 [Sun Apr 22 22:20:47 2001] [notice] Apache/1.3.19 (Unix) 
 PHP/4.0.4pl1 configured -- resuming normal operations

You can test your PHP by creating the following file and putting it somewhere in your web directory space:

 <? phpinfo(); ?>

Call it php_info.php3. If you access this file with a browser you should see a nice page describing the PHP compilation options, and a lot of other useful information.

Part 3 of this series will deal with SquirrelMail, and Part 4 with enabling SSL. The following week will feature a closing sidebar story regarding off-the-shelf packages that handle IMAP under UNIX systems.