802.11n Draft 2.0 Certs Around the Corner

By Eric Griffith | May 16, 2007 | Print this Page
http://www.enterprisenetworkingplanet.com/news/article.php/3678126/80211n-Draft-20-Certs-Around-the-Corner.htm

The Wi-Fi Alliance will launch its certification program for 802.11n Draft 2.0 products in late June as expected. The program features a new test bed of products for interoperability testing, plus a brand new logo design for the packaging of certified products.

"The logo focuses on 11n capability and backward compatibility to a or g or both," says Karen Hanley, senior director of marketing for the Alliance. "It was a design we choose from more than 200 options, which we tested with consumers and took to the membership for approval. Everyone thought it did the best job of showing the backward compatibility element." She says for now the Alliance can't make guarantees to anyone about upgradeability to the final 11n spec, even if vendors promise the firmware. Because of that, "backwards compatibility is what we're most worried about."

The logo, as shown, includes the word "DRAFT" but that will be dropped once the 802.11n specification is ratified in 2008 and products are tested (or even retested) for the final standard.

The new test bed of products the Alliance will utilize in its seven certification labs around the globe are mostly reference designs from chip makers Atheros' Xspan, Broadcom's Intensi-Fi, Marvell's TopDog, and Ralink's MIMObility, each with a router/AP and client card. There's also a Cisco ()AP and the Intel ()Wireless WiFi Link 4965AGN-- the chip powering the Wi-Fi in the new Centrop Pro/Centrino Duo laptops. All the products have been tested, as per Hanley's comments above, as interoperable with 802.11abg legacy products.

The test bed software tool is WildPackets OmniPeek Workgroup Pro.

The Alliance test will only include 40MHz channels -- an option of 802.11n to increase bandwidth -- in the 5GHz spectrum. A possibility of interference exists with 802.11b and 11g products using the 2.4GHz band. Newer 11n products (which can support both 5GHz and 2.4GHz) are expected to be a good neighbor to existing networks, so all products are expected to dummy down to 20MHz channels when legacy networks are in range. This ability to find older networks and respect them is called the " greenfield preamble."

Hanley says the labs are currently doing quality control tests with the test bed and praised the companies providing products: "It represents a big commitment by them to invest the engineering hours." It also doesn't hurt that they can market their reference designs as already Wi-Fi Certified of course, giving their OEM ( define)customers reassurance that their final products are more than likely to pass certification testing the first time around.

Starting with the 11n testing, the formerly optional Wi-Fi MultiMedia (WMM) test for Quality of Service (QoS), as specified in the 802.11e spec, is now mandatory. Wi-Fi Protected Access 2 (based on 802.11i) is still mandatory. Other options that vendors can request testing of include power savings and Wi-Fi Protected Setup (WPS), the Alliance's first standard of its own, building an ease-of-use feature on top of the WPA security.

"We expect strong uptake of [11n certification testing]," Hanley told Wi-Fi Planet. "We expect to see certified products on shelves in the summer -- in fact, the logo is available to vendors now so they can prepare their packaging. Once they're certified, they can sell in the channel."

The Alliance will have a white paper available today for both retailers selling 11n Draft 2.0 products, and consumer buying them, discussing the up and downsides of the still unratified specification.

Researchers at Telecom Trends International say the market for Wi-Fi products will reach $5.6 billion in revenue by the year 2012, with 11n adoption a major factor in the growth. 11n will offer both upgrades in speed and range over the current 802.11abg products.

Article courtesy of Wi-Fi Planet

Add to del.icio.us | DiggThis