The Enterprise Networking Planet 10 Gigabit Ethernet Project Center is available now and will help network managers successfully meet today’s capacity needs while setting the stage to handle future growth.
You can download all of the entire Project Center or just the parts you need to start your 1 GbE to 10 GbE migration.
The Project Center was created by network pros and walks you through the entire evaluation cycle; from looking at the business case for 10 Gigabit Ethernet and identifying key equipment vendors. We also provide you with an extensive product comparison grid. When you’re ready to move ahead you can download our no-cost sample RFP to get your project started on the right foot.
You can gain insight from two case studies, the first of a large, international construction firm and the second, a regional insurance organization. Both used a migration to 10 GbE to accommodate the growing need for bandwidth in an increasingly virtualized environment.
While server virtualization in the data center is one of the main drivers for increasing network bandwidth capacity it’s not the only one. The development of 40 GbE and 100 GbE technologies, along with Fibre Channel over Ethernet (FCoE) raise the very real possibility of converging production and storage networks. A well-planned move from 1 GbE to 10 GbE networking can lay the groundwork for an orderly transition to these higher speed offerings.
Thus, this Project Center gets you ready to meet today’s network bandwidth challenge while also setting you up for success in the future. Our Buyer’s guide lays out the basic information you need to compare offerings from the major network equipment makers. The sample RFP that suggests the right questions to ask to ensure that you get the equipment and services you need to meet your specific objectives.
You can download the ENP 10 GbE Project Center now to get our expert guidance that can speed the evaluation process and shorten the time needed to get the network bandwidth your business needs.